DESIGN UPPER STRUCTURE OF THE RIVER BAKI BRIDGE USES A STEEL FRAME

Authors

  • Tasliyatul Fuadiyah
  • Dedi Enda
  • Indriyani Puluhulawa

DOI:

https://doi.org/10.33603/jgst.v2i3.2146

Abstract

In general, the bridge type is a reinforced concrete bridge, composite and steel frame. The Baki River Bridge was originally a 40 m long Wood type bridge connecting the village of Mengkopot - Tanjung Pisang because the condition of the Baki river bridge has been damaged especially on bridge floors and girders due to age, so it is planned to re-use the steel frame bridge structure. By using the steel bridge structure, it is expected that later it can be a comparison for the future bridge planning.
In this study, the structure of the planned bridge consists of bridge slabs, sidewalk slabs, backrest pipes, longitudinal and transverse girders, steel frames, wind ties, and joints. By following the SNI T-02-2005 bridge loading standard, SNI T-03-2005 for planning steel bridge structures and SNI T-12-2004 for planning concrete structures on bridges.
From the planning results obtained thickness 200 mm Bridge Slab and thick sidewalk slab 250 mm with a longitudinal girder profile used WF 600.200.11.17 mm steel with a distance between girders 1.75 m. Transverse girders of steel profiles WF 700,300.13.24 are used with the distance between girders 5 m. Used Steel profiles WF 400,400.13.21 as Main Frame and Steel WF profile 150.150.7.10 as profiles for wind ties.
‘Keywords: Steel frame, girder, connection,

References

Bridge Engineering Planning (2010) Ministry of Public Works, Directorate General of Highways.

SNI T-02-2005, Imposition for Bridges, BSN, Jakarta, 2005.

SNI T-03-2005, Steel Structure Planning for Bridges, BSN, 2005.

SNI T-12-2004, Concrete Structure Planning for Bridges, BSN, 2004.

Setiawan A, Steel Structure Planning with LRFD Method (Based on SNI 03-1729-2002). (2008) Airlangga, Jakarta.

Subandi, Agus, et al. 2016. Planning for Steel Frame Bridges (Case Study of Bayang Bridge, Ujung Gading), Bung Hata University, Padang.

Downloads

Published

2019-04-08

Issue

Vol. 2 No. 3 (2018): JOURNAL OF GREEN SCIENCE AND TECHNOLOGY

Section

Artikel

Citation Check

License

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share and adapt the work with an acknowledgement of the works authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journals published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Upon receiving the proofs, the Author/Editor agrees to promptly check the proofs carefully, correct any errors, and authorize the publication of the corrected proofs.