DESIGN PROTOTYPE OF SMART DETECTOR ENVIRONMENT SYSTEM ON SEMICONDUCTOR DETECTOR STORAGE (HPGE)
DOI:
https://doi.org/10.33603/jgst.v6i2.7067Abstract
The HPGe detector is a device that should be cooled when used and can be operated at room temperature. For this reason, it is necessary to monitor the temperature and humidity in the HPGe detector storage area to produce optimal performance. This research was focused on designing a Smart Detector Environment System as a means of monitoring and automatic control of temperature and humidity in the HPGe detector storage. Temperature and humidity detection in the system was carried out by the DHT22 sensor connected to Arduino Uno and the motor driver module. Arduino uno gave the command "00000011" to detect the temperature in the chamber, and "00000101" to start the detection of humidity in the chamber, then the data generated by the DHT22 sensor would be displayed and processed by LabVIEW, which was used to move the fan to regulate the temperature and humidity in the system with the condition that the lamp on the chamber was left on (manual). The results obtained were in the form of a design and automatic control of temperature and humidity monitoring and control in the HPGe detector storage whose temperature could be adjusted automatically according to the needs of the HPGe detector.
References
A.Hendra dan J.Arifin, Sistem Pemantau Suhu dan Kelembaban Ruangan dengan Notifikasi Via Email, PROSIDING SEMINAR NASIONAL MULTI DISIPLIN ILMU & CALL FOR PAPERS UNISBANK ke-2, Semarang, Indonesia (2016)
Baltic Scientific Instrument. HPGe Detector with Lead Shield http://bsi.lv/en/products/hpge-detectors-spectrometers/hpge-spectrometer-lead-shield/.
Access in June, 16 2022.
Dedy Irawan, Rancang Bangun Prototipe Lift Barang Menggunakan Motor Arus Searah dengan Perintah Smartphone Android, Universitas Lampung, Bandar Lampung, Indonesia (2016)
H. Muhammad Asraf., K.A. Nur Dalila., A.W. Muhammad Hakim., R.H. Muhammad Faizzuan Hon. Development of Experimental Simulator via Arduino-based PID Temperature Control System using LabVIEW. Journal of Telecommunication, Electronic and Computer Engineering e-ISSN: 2289-8131 Vol. 9 No. 1-5 2017
Kothari, C.R. (2009) Research Methodology: Methods and Techniques. New Age International (P) Ltd., New Delhi, India.
ORTEC Best Practices for HPGe Detector Handling and Maintenance (https://www.ortec-online.com/service-and-support/library/tech-notes/best-practices-for-hpge4/26/2018). Diakses pada tanggal 26 April 2018
Rendi Aditia, Tjut Awaliyah Zuraiyah, dan Agung Prajuhana Putra, Model Otomatisasi Ayam Ternak Menggunakan Logika Fuzzy, Program Studi Ilmu Komputer – FMIPA Universitas Pakuan, Bogor, Indonesia (2010)
Rindi Wulandari. (2020). Rancang Bangun Pengukur Suhu Tubuh Berbasis Arduino Sebagai Alat Deteksi Awal Covid - 19, Prosiding SNFA (Seminar Nasional Fisika dan Aplikasinya) 2020.
Rindi Wulandari, Ostad Al Karim, dan Edo A N. (2021). Automatic door simulator design based on arduino uno using proteus software, Journal of Green Science and Technology 2021.
Tarizman Tasya. (2021). Rancang Bangun Simulator Georesistivity Meter Multichannel Berbasis Arduino Uno Menggunakan Software Proteus. Skripsi. Departemen Pendidikan Fisika- FPMIPA UPI Bandung
Tutorial Motode Optimasi pada Labview, Jurusan Teknik Elektro, Universitas Komputer Indonesia (2005).
Downloads
Published
Issue
Section
Citation Check
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share and adapt the work with an acknowledgement of the works authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journals published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Upon receiving the proofs, the Author/Editor agrees to promptly check the proofs carefully, correct any errors, and authorize the publication of the corrected proofs.
