Performance Analysis and Passenger Satisfaction on Trans Jakarta Bus Services (Cibubur Route – BKN)
DOI:
https://doi.org/10.33603/jste.v1i2.6132Kata Kunci:
trans jakarta performance, passenger satisfaction, trans jakarta Cibubur-BKNAbstrak
DKI Jakarta has built a BRT (Bus Rapid Transit) transportation system, also known as Transjakarta, which has been operating since January 15, 2004, one of which is serving the Cibubur-BKN route. The purpose of this study was to determine the extent of service performance and customer satisfaction of users of the route. The methodology used is to collect data directly in the field using a questionnaire that refers to the Standards of the Director General of Land Transportation with indicators such as load factor, headway, vehicle frequency per hour, travel time, service time, travel speed and number of vehicles operating. The data were analyzed using the Importance Performance Analysis method which was processed using SPSS software. From the results of the analysis, the results of the quality of the performance of Transjakarta buses have met the standards of the Director General of Land Transportation, and the results of the dimensions of direct evidence of reliability, responsiveness, assurance, empathy and tangibles, the average results of service quality dimensions for the performance of Transjakarta route Cibubur - BKN Cawang reach a value of 3, 15 or the performance of the services provided in each of the service dimensions studied reached a fairly good category. And the average level of satisfaction of Transjakarta passengers on the Cibubur – BKN Cawang route reached a value of 3.13, which is quite satisfied.Referensi
Cervero, R. (2014). Transport Infrastructure and the Environment in the Global South: Sustainable Mobility and Urbanism. Jurnal Perencanaan Wilayah Dan Kota, 25(3), 174–191.
Dermawan, W. B., Bagaskara, H., Isradi, M., & Mufhidin, A. (2021). Analysis of Sidewalk or Pedestrian Path Satisfaction ( Case Study of Jalan Casablanca , Kota Kasablanka Mall Area ). IJTI (International Journal of Transportation and Infrastructure), 5(1), 53–63.
Handayani, S. (2018). Model Volatilitas Lali Lintas Dinamis Dengan Pendekatan Geometric Brownian Motion. In Jalan Dan Model Pengembangan Infrastruktur Transportasi. Kuadran, Bandung.
Irfan Rifai, A., Fazadi Rafianda, D., Isradi, M., & Mufhidin, A. (2021). Analysis Of Customer Satisfaction On The Application Of The Covid-19 Protocol At The Inter-City Bus Terminal. International Journal of Engineering, Science and Information Technology, 1(1), 75–81. https://doi.org/10.52088/ijesty.v1i1.107
Isradi, M., Dwiatmoko, H., Putri, Mu. D. R., Hidayatullah, R., & Prasetijo, J. (2020). Analysis Of Effectiveness Service Of Public Transportation Mass Rapid Transit Or MRT Case Study Lebak Bulus – Bundaran HI. Proceedings of the International Conference on Industrial Engineering and Operations Management, 2019(August), 3425–3434.
Isradi, M., Dwiatmoko, H., Setiawan, M. I., & Supriyatno, D. (2020). Analysis of Capacity, Speed, and Degree of Saturation of Intersections and Roads. Journal of Applied Science, Engineering, Technology, and Education, 2(2), 150–164. https://doi.org/10.35877/454ri.asci22110
Kementrian Pekerjaan Umum. (2018). Pd 01-2018-B Kriteria Menuju Jalan Hijau.
Miro, F. (2012). Pengantar Sistem Transportasi. Erlangga.
Prasetijo, J., Musa, W. Z., Zainal, Z. F., Ambak, K., & Sanik, M. E. (2016). Level of Bus Performance Based on the Relationship between Distance and Travel Time of Universiti Tun Hussein Onn Malaysia (UTHM) Bus Services. MATEC Web of Conferences, 87. https://doi.org/10.1051/matecconf/20178702006
Prasetijo, J., Zhang, G., Jawi, Z. M., Mahyeddin, M. E., Zainal, Z. F., Isradi, M., & Muthukrishnan, N. (2021). Crash model based on integrated design consistency with low traffic volumes (due to health disaster (COVID-19)/movement control order). Innovative Infrastructure Solutions, 6(1), 22. https://doi.org/10.1007/s41062-020-00388-7
Rangkuti, F. (2003). Measuring Customer Statisfaction. PT. Gramedia Pustaka Utama.
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
JSTE (Journal of Science, Technology, and Engineering) is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.