ANALISIS PERENCANAAN GEDUNG RUSUN CIPANAS KABUPATEN CIANJUR DENGAN MENGGUNAKAN STRUKTUR BETON

Authors

  • Martina Rachim Universitas Swadaya Gunung Djati Cirebon, Indonesia
  • Sumarman Sumarman Universitas Swadaya Gunung Djati Cirebon, Indonesia

DOI:

https://doi.org/10.33603/jki.v8i1.3761

Abstract

ABSTRAK

Kabupaten Cianjur merupakan salah satu kabupaten di Jawa Barat yang memiliki sumber daya alam yang melimpah, air dan tumbuh-tumbuhan. Selama ini Pemerintah Kabupaten Cianjur menjalin kerja sama yang baik dan harmonis untuk pembangunan kemajuan Cianjur, salah satunya dengan TNI khususnya dengan Yon Armed 5/105 Tarik. Yon Armed 5/105 Tarik membangun Rumah Susun (Rusun) Yon Armed 5/105 untuk para anggota Yon Armed 5/105 Tarik.

Analisis pembebanan pada struktur Gedung Rusun Cipanas Kabupaten Cianjur dilakukan dengan bantuan program SAP 2000 v.15. Hasil analisa SAP 2000 v.15 akan memberikan reaksi gaya- gaya dalam yang akan digunakan untuk perencanaan kebutuhan tulangan balok dan perencanaan kebutuhan tulangan kolom gedung Rusun Cipanas Kabupaten Cianjur. Perhitungan gaya gempa yang terjadi pada struktur Gedung Rusun Cipanas dianalisa berdasarkan acuan SNI 1726-2012, dimana dalam melakukan analisis terhadap beban gempa yang terjadi di struktur gedung Rusun Cipanas menggunakan Respon Spektra Gempa.

Kata kunci : Analisis, Perencanaan, Struktur Beton Bertulang, Kolom, Balok, Plat Lantai, Rusun   Cipanas.

ABSTRACT

Cianjur Regency is one of the districts in West Java that has abundant natural resources, water and plants. So far the Cianjur Regency Government has established good and harmonious cooperation for the development of Cianjur's progress, one of which is with the TNI specifically with Yon Armed 5/105 Tarik. Yon Armed 5/105 Tarik to build Yon Flat Armed 5/105 for members of Yon Armed 5/105 Tarik.

Loading analysis on the structure of the Rusun Cipanas Building in Cianjur Regency was carried out with the help of the SAP 2000 program v.15. The results of the SAP 2000 v.15 analysis will react to the internal forces that will be used for design of beam reinforcement requirements and design of column reinforcement requirements on the Rusun Cipanas Building in Cianjur Regency. The earthquake force calculation that occurred on the structure of the Rusun Cipanas Building in Cianjur Regency was analyzed based on the reference of SNI 1726-2012, where in carrying out an analysis of the earthquake load that occurred on the structure of the Rusun Cipanas Building using the Response of the Earthquake Spectra.

Keywords : Analysis, Design, Reinforced Concrete Structure, Column, Beam, Plat, Rusun Cipanas.

References

Asroni A. (1), 2010. Balok dan Pelat Beton Bertulang, Graha Ilmu : Yogyakarta.

Asroni A. (2), 2010. Kolom Fondasi dan Balok T Beton Bertulang, Graha Ilmu : Yogyakarta.

Badan Standarisasi Nasional, Tata Cara Perencanaan Ketahanan Gempa Untuk Struktur Bangunan Gedung dan Non Gedung SNI 1726-2012.

Badan Standarisasi Nasional, Tata Cara Perencanaan Struktur Baja Untuk Bangunan Gedung SNI 03-1729- 2002.

Badan Standarisasi Nasional, Persyaratan Beton Struktural Untuk Bangunan Gedung SNI 2847-2013.

Badan Standarisasi Nasional, Beban Minimum Untuk Perancangan Bangunan Gedung Dan Struktur Lain SNI 1727-2013.

Departemen Pekerjaan Umum, Peraturan Pembebanan Indonesia Untuk Gedung (PPIUG) 1983. Yayasan Badan Penerbit PU.

Gunawan R., 2012. Tabel Profil Konstruksi Baja. Kanisius : Yogyakarta.

Satyarno dkk, 2012. Belajar SAP 2000 Analisis Gempa Seri 1. Zamil Publishing : Yogyakarta.

Satyarno dkk, 2012. Belajar SAP 2000 Analisis Gempa Seri 2. Zamil Publishing : Yogyakarta.

Downloads

Published

2020-07-18

Issue

Vol. 8 No. 1 (2019): JURNAL KONSTRUKSI (JANUARI 2019)

Section

Artikel

Citation Check

License

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share and adapt the work with an acknowledgement of the works authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journals published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Upon receiving the proofs, the Author/Editor agrees to promptly check the proofs carefully, correct any errors, and authorize the publication of the corrected proofs.